Description
| A matt-finish, super low-odour, waterborne acrylate primer for use on interior walls and ceilings. It is extremely adhesive and resistant to acid and alkaline, offering a first-class foundation for subsequent coats of other Feelings paints. | |
| Country of Origin: | Finland |
| Thinner: | Water |
| Base paints: | AP |
| Chemical resistance: | Resists cleaning detergents and weak solvents. |
| Application Details: | |
| Application method: | Brush, roller or spray application. For airless spray use nozzle 0.015”– 0.021”. |
| Coverage: |
For absorbing surfaces 9-11 m²/l. For non-absorbing surfaces 12-14 m²/l. This information is only intended as a guide. The actual coverage will depend on the substrate texture, absorption rate, application methods, and many other factors. |
| Thinning: | Thin with up to 20% of water if necessary. |
| Preparation: |
The surface to be painted must be clean, dry and free of grease, dust and fibres. Wash down previously painted surfaces with a suitable cleaning agent, rinse carefully and let dry. Remove loose, flaking paint with a scraper. Treat moulded walls with a suitable mould removing solvent and then rinse with water. Sand hard or glossy surfaces to a matt finish and remove sanding dust. Fill holes and cracks with a suitable filler and sand the dried surface. Prime the surface with Feelings Universal Primer before coating, if necessary. For new surfaces: Remove dirt and dust. Fill the surfaces with a suitable filler, if needed, and sand the dried surface. Remove sanding dust. Paint directly with Feelings Universal Primer. The finishing paint can be an acrylic paint like Feelings Interior Paint, Lumi Interior Paint or Joker. |
| Painting: | Apply 1-2 times by brush, roller or spray according to surface conditions. The surface to be painted must be dry, the temperature of the air above 5℃ and the relative humidity of the air lower than 80%. Stir well before use and thin with 20% of water, if necessary. |
| Drying time | Dust dry after 1/2 hour at 25℃. Re-coatable after 2-4 hours. Wallpaper can be hung the following day. |
| Environmental and waste disposal | Empty tins should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations without causing contamination. |
| Storage | Protect from frost. Any remaining paint can be preserved for future use with the cap placed back on. |
| Shelf life | 3 years with the cap still intact. The expiry date is marked on the tin. |
| 1. The above information is not intended to be exhaustive or complete. The information is based on laboratory tests and practical experience, and it is given to the best of our knowledge. The quality of the product is ensured by Tikkurila’s operational system, based on the requirements of ISO 9001 and ISO 14001. As manufacturer Tikkurila cannot control the conditions under which the product is being used or the many factors that have an effect on the use and application of the product. Tikkurila disclaims liability for any damages caused by using the product against our instructions or for inappropriate purposes. Tikkurila reserves the right to change the given information unilaterally without notice. | |
