Description
A super eco-friendly acrylic primer that will achieve the best effect when used with Joker on top, and is also a good match with Toha, Harmony and Premium Ecological. It offers super strong resistance to alkaline and water, with excellent sealing power and near-zero VOC and formaldehyde emissions. It is an ideal primer for high-end renovation projects. It conforms to the Finnish M1 emission classification. | |
Country of Origin: | Finland |
Thinner: | Water |
Base paints: | AP |
Chemical resistance: | Resists cleaning detergents and weak solvents. |
Application Details: | |
Application method: | Brush, roller or spray application. For airless spray use a 0.017”– 0.021” spray tip. |
Coverage: |
12-14㎡x 1 coat / Litre This information is only intended as a guide. The actual coverage will depend on the substrate texture, absorption rate, application methods, and many other factors. |
Thinning: | Thin with up to 20% of water if necessary. |
Preparation: |
New surfaces: Remove dirt and dust. Fill the surfaces with a suitable filler, if needed, and sand the dried surface. Remove sanding dust. Paint directly with Varma Primer. Previously painted surfaces: Wash down previously painted surfaces with a suitable cleaning detergent and rinse carefully with water. Fill cracks and holes with a suitable filler and sand the dried surface. Remove sanding dust. |
Painting: | The wall surface must be dry at a room temperature above 5℃ and a relative humidity lower than 80%. Stir well before use and thin with 20% of water, if necessary. |
Drying time | Dust dry in half an hour. Re-coatable after 2-4 hours. Wallpaper can be hung the following day. |
Environmental and waste disposal | Empty tins should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations without causing contamination. |
Storage | Protect from frost. Any remaining paint can be preserved for future use with the cap placed back on. |
Shelf life | 3 years with the cap still intact. The expiry date is marked on the tin. |
The above information is not intended to be exhaustive or complete. The information is based on laboratory tests and practical experience, and it is given to the best of our knowledge. The quality of the product is ensured by Tikkurila’s operational system, based on the requirements of ISO 9001 and ISO 14001. As manufacturer Tikkurila cannot control the conditions under which the product is being used or the many factors that have an effect on the use and application of the product. Tikkurila disclaims liability for any damages caused by using the product against our instructions or for inappropriate purposes. Tikkurila reserves the right to change the given information unilaterally without notice. |