Nova Plast 2
9L | HK$1,875

Tin Size & price: 9L | HK$1,875
Gloss Grade: Full Matt
Coverage: 12-14㎡ x 1 coat / Litre
Technical Data:
Eco Accreditations:
芬蘭M1認證 北歐白天鵝生態標誌國際標準組織生產品質/環境管理認證(IS09001)國際標準組織生產品質/環境管理認證(IS014001)
Categories: ,

Description

A quality interior wall paint with a full-matt finish that can be used both as a top coat and a primer. It is also suitable for use on ceilings. A super low- odour and super eco-friendly paint that effectively covers small cracks and is alkaline resistant and easy to apply.
 Note: The price(s) shown above is (are) for white paints only. A tinting fee is charged for paints of other colours.
Country of Origin: Finland
Thinner: Water
Base paints: AP
Chemical resistance: Resists cleaning chemicals and weak solvents.
Application Details:
Application method: Brush, roller or spray application. For airless spray use a 0.017”– 0.021” spray tip.
Coverage:

12-14㎡x1/L

This information is only intended as a guide. The actual coverage will depend on the substrate texture, absorption rate, application methods, and many other factors.

Thinning: Thin with up to 30% of water if necessary.
Preparation: Remove all dirt and dust. If necessary, smooth the surface with a suitable filler and sand the dried surface. Remove sanding dust.
Painting: Stir well before use and thin with water, if necessary. Apply a coat of Nova Plast 2 primer.
Drying time: Dust dry after half an hour under normal circumstances. Recoatable after 2-4 hours.
Environmental and waste disposal: Empty tins should be recycled or disposed of in accordance with local regulations. Liquid waste should be destroyed according to the local regulations without causing contamination.
Storage: Protect from frost. Any remaining paint can be preserved for future use with the cap placed back on.
Shelf life: 3 years with the cap still intact. The expiry date is marked on the tin.
The above information is not intended to be exhaustive or complete. The information is based on laboratory tests and practical experience, and it is given to the best of our knowledge. The quality of the product is ensured by Tikkurila’s operational system, based on the requirements of ISO 9001 and ISO 14001. As manufacturer Tikkurila cannot control the conditions under which the product is being used or the many factors that have an effect on the use and application of the product. Tikkurila disclaims liability for any damages caused by using the product against our instructions or for inappropriate purposes. Tikkurila reserves the right to change the given information unilaterally without notice.